The value of UK manufacturers’ product sales was £357.8 billion in 2015, a 1.3% decrease on the 2014 estimate of £362.5 billion and could be attributed to the fall in producer prices. This is the first contraction in manufacturers’ sales since the 2008 to 2009 economic downturn.
The manufacture of machinery and equipment not elsewhere classified division had the largest fall between 2014 and 2015 with £2.7 billion (9.7%) in the value of manufacturers’ sales.
A decline in the value of sales was also reported for divisions such as chemicals, food products and basic metals.
The manufacture of motor vehicles, trailers and semi-trailers saw the largest growth in the value of manufacturers’ sales in 2015, with an increase of £1.2 billion (2.6%) to £48.6 billion.
The top 3 ranked UK manufacturers’ product sales in 2015 are petrol vehicles with an engine capacity greater than 1500cc, parts for civil aircraft and diesel vehicles with an engine capacity of between 1500cc and 2500cc.
The UK’s share of total EU manufacturers’ product sales in 2015 is estimated to be around 10%.Nôl i'r tabl cynnwys
PRODCOM covers product sales by UK manufacturers; this is not the same as UK retail sales, which refer to the sales of goods by retail businesses, or consumer purchases. Links to other manufacturing data sources are mentioned at section 8.
All estimates of the value of product sales are presented at current prices, meaning that they have not been adjusted for inflation; this is important to bear in mind when comparing value changes over time.
For division 24 (manufacture of basic metals) estimates for the manufacture of basic iron and steel and of ferro-alloys are not included in the overall UK PRODCOM sales figures or in the divisional total.
For division 19 (coke and refined petroleum products), we only include one product – “pitch and pitch coke, obtained from coal tar or from other mineral tars” which is covered within a single industry (19100: the manufacture of coke oven products). In 2015 there were no businesses within the PRODCOM sample population specifically classified to this industry.
Due to coverage, methodological, sample, or other differences, PRODCOM estimates may not always match figures given in other manufacturing data sources. Details on the PRODCOM survey methodology can be obtained from the PRODCOM technical report while products covered can be found in the PRODCOM list.
It is sometimes necessary to suppress figures for certain products in order to avoid disclosing information about an individual business. The PRODCOM technical report describes the methods used to safeguard the information provided in confidence to us. In the same way our commentary must also avoid disclosing information about individual businesses.
PRODCOM estimates are designated as National Statistics which means that the data have been produced in compliance with the Code of Practice.Nôl i'r tabl cynnwys
UK manufacturers’ sales were valued at £357.8 billion in 2015, a fall of 1.3% from the 2014 estimate of £362.5 billion. The decrease represents the first reduction in manufacturers’ product sales since the 2008 to 2009 economic downturn.
The decline in the value of sales coincides with a fall in producer prices since 2014, which is largely attributed to the fall in oil prices as explained in Producer Price Index, December 2015 publication. The downward movement reported in this bulletin is broadly in line with other official data sources such as the Index of Production and the Annual Business Survey.
Even though the sales of UK manufacturers’ contracted in 2015 with just over half of manufacturing divisions (including machinery and equipment, chemicals and food products) contributing to the decline, the manufacture of motor vehicles, other non-metallic minerals, basic pharmaceutical products and other transport equipment all showed an increase of over 2.0% in product sales (Table 1).
Table 1: Contribution to growth and percentage change by division, 2014 to 2015, UK
|Sales value (£ billion)|
|Manufacturing Division||2014||2015||Change (%)||Contribution to overall growth (percentage points)|
|Motor vehicles, trailers and semi-trailers||47.4||48.6||2.6||0.3|
|Other non-metallic mineral products||11.5||12.3||7.0||0.2|
|Basic pharmaceutical products and pharmaceutical preparations||10.9||11.5||5.3||0.2|
|Other transport equipment||27.2||27.8||2.1||0.2|
|Repair and installation of machinery and equipment||14.1||14.2||0.8||0.0|
|Computer, electronic and optical products||12.1||12.2||0.1||0.0|
|Leather and related products||0.7||0.7||0.2||0.0|
|Fabricated metal products, except machinery and equipment||25.6||25.5||-0.1||0.0|
|Paper and paper products||10.4||10.2||-2.1||-0.1|
|Chemicals and chemical products||21.4||20.3||-5.2||-0.3|
|Machinery and equipment n.e.c.||27.6||24.9||-9.7||-0.7|
|All other divisions||58.8||56.1||-4.5||-0.7|
|Total UK manufacturers' sales||362.5||357.8||-1.3||Total growth -1.3|
|Source: Office for National Statistics|
|1. Table 1 shows the manufacturing divisions with available published data. Some have been suppressed to avoid disclosure, but included in ‘All other divisions’. Full list of divisions can be obtained from the PRODCOM technical report.|
|2. Manufacturing divisions are based on the coverage of PRODCOM survey.|
|3. Divisions contributing to the decline are machinery and equipment, chemicals, food, basic metals, paper, tobacco, textiles, wood, electrical equipment, rubber and plastic products and other manufacturing.|
|4. Figures have been rounded in Table 1.|
Download this table.xls
Between 2014 and 2015, the manufacture of machinery and equipment not elsewhere classified reported a reduction in sales of 9.7% (£2.7 billion). The division saw the largest negative contribution (0.7 percentage points) to total UK manufacturing growth rate for 2015.
An industry that showed a large fall within this division is the manufacture of taps and valves. Specifically, “parts for taps, cocks, valves and similar appliances for pipes, boiler shells, tanks and vats”, saw the largest reduction in sales for any product in 2015, a fall of over £500 million (42.9%) from 2014. Anecdotal evidence from businesses responding to this survey indicates that a reason for the weak sales was a price fall in the oil and gas sector.
The UK manufacturers’ sales in the chemicals division were £20.3 billion in 2015, a contraction of around 1 billion pounds (5.2%) since 2014. In 2008, the manufacture of other organic-based chemicals was the largest industry within the chemicals division, with estimated sales of £4.5 billion. However by 2015, the value of sales (£2.4 billion) within the industry were almost half (46.9%) of that reported in 2008. At product level, the sale of mineral or chemical fertilizers containing nitrogen, phosphorus or potassium fell from £451 million in 2014 to £325 million in 2015, a fall of 27.9% (£126 million). This is the second consecutive year that sales for this product have declined by over £100 million.
Basic metals division reported sales of £6.0 billion in 2015, a decrease of 8.7% (£570 million) from 2014. This continues the decline first reported in 2012. A main driver was the decline in unwrought silver; with sales falling 95.9% since 2014. The negative contribution to growth by the metals sector has also been reported in the Index of Production, January 2016 release.Nôl i'r tabl cynnwys
Since the economic downturn, the manufacture of motor vehicles, trailers and semi-trailers has grown at a faster rate than any other division. Sales in current prices increased 77.8%, from £27.4 billion (2009) to £48.6 billion (2015). This division generated the largest contribution to growth between 2014 and 2015 and is the only division to report increased sales of over £1.0 billion. All 4 industries within this division contributed to this growth. They are the manufacture of:
bodies (coachwork) for motor vehicles; trailers and semi-trailers
electrical and electronic equipment for motor vehicles
other parts and accessories for motor vehicles
However, UK manufacturers’ sales of motor vehicles with petrol engine capacity above 1500cc contracted by 1.5% (£241 million) between 2014 and 2015. The sales value of this product has more than doubled between 2009 (£7.8 billion) and 2015 (£16.0 billion). The Society of Motor Manufacturers and Traders, the UK car industry’s trade body, announced that British car manufacturing has had its best year in a decade as exports reached a record 10-year high in 2015, despite a fall in demand from global markets such as China and Russia.
One industry that had strong sales which enhanced the growth of the motor vehicles, trailers and semi-trailers division is the manufacture of parts and accessories for vehicle bodies. The value of product sales increased by 11.2% (£327 million); from £2.9 billion in 2014 to £3.3 billion in 2015. Reasons for the increase suggested by businesses responding to this survey include new contracts for manufacturers to supply parts to the luxury car market and improved automation at some UK plants. Our Business Enterprise Research and Development survey confirmed that the motor vehicles and parts product group had the largest increase in R&D expenditure performed by UK businesses in 2015.
Other divisions which contributed to growth in the value of sales include other non-metallic minerals and pharmaceuticals. UK manufacturers’ sales in the other non-metallic mineral division have increased for a third consecutive year with growth of 7.0% (£805 million) since 2014, to £12.3 billion in 2015. At product level, the manufacture of ready-mixed concrete had the highest value sales within the industry, at £1.6 billion with increased sales of 24.9% (£326 million) between 2014 and 2015.
The pharmaceutical division reported sales growth for the first time since 2010. Between 2010 and 2014, divisional sales declined by 25.9% to £10.9 billion, however there was a 5.3% (£575 million) increase in 2015, to £11.5 billion. The 2 industries within the division recorded growth in 2015. They are the manufacture of:
basic pharmaceutical products
In particular, product sales of £5.7 billion for medicaments, excluding antibiotics, hormones, steroids, alkaloids and vitamins, represented half of all the divisional sales in 2015 and an increase of 4.6% (£250 million) since 2014.
The interactive tree map (Figure 2) can be used to explore the share of PRODCOM manufacturing divisions and industries to total UK manufacturers' product sales in 2015.
Figure 2: UK manufacturers' sales by division and industry, 2015
Figure 3 shows the 10 products with the highest sales value for 2015 and highlights the change in product ranking compared with 2010.
Motor vehicles with a petrol engine capacity above 1500cc remain the product with the largest value of UK manufacturers’ sales in 2015, with a growth of £5.2 billion (48.3%) since 2010.
The second-ranked product (parts of civil aircraft) has a sales value of about half of the first-ranked product (motor vehicles with a petro engine capacity above 1500cc) and has moved up the ranking. Manufacturers for parts of civil aircraft have had a sustained period of steady growth since 2010 culminating in a sales value of £8.7 billion in 2015, an increment of 1.4% from 2014. The UK’s Aerospace, Defence, Security and Space trade body, the ADS group, has cited record customer orders.
UK manufacturers of motor vehicles with diesel engines between 1500cc and 2500cc increased their sales from £7.7 billion in 2014 to £7.8 billion in 2015. This product is ranked third in 2015, up from the fifth position in 2010.
The largest growth in sales among the top 10 was from the manufacture, installation and repair of military vessels. This product was outside the top 10 in 2010 but ranked eighth in 2015. Sales increased by 17.8% (£542 million), from an estimated £3.0 billion in 2014 to £3.6 billion in 2015. This increase comes at a time when businesses responding to this survey confirmed the completion of a large number of high-profile contracts.
Medicaments, excluding antibiotics, hormones, steroids, alkaloids and vitamins, remain a top 10 product despite a fall in the rankings from 2010.
The beverage division is represented by 2 products in the top 10; beer and soft drinks. Between 2010 and 2015, beer dropped in ranking from sixth highest sales, to ninth. Conversely, soft drinks moved up from seventh position in 2010 to sixth in 2015. Beer sales increased by 8.1%, from £3.2 billion (2014) to £3.5 billion (2015) while soft drinks experienced negative growth in 2015, with sales falling 5.1% to £4.0 billion.
The manufacture of fresh bread entered the top 10 products for the first time in 2015. Product sales have increased by 28.5%, since 2010, making it the product with the 10th highest value of sales in the UK.
UK manufacturers’ product sales outside the top 10 that recorded large decreases between 2014 and 2015 include:
structures of iron and steel; decreased by £375 million (11.5%); evidence gathered suggests this is due to heavy losses in the oil industry as a result of falling oil prices
milk and cream (semi-skimmed milk packaged under 2L); decreased by £255.5 million (19.1%)
petrol engines for vehicles of a cylinder capacity above 1000cc; decreased by £224.0 million (12.3%)
The PRODCOM survey on production of manufactured goods is carried out annually by European Union (EU), under EU regulation to enable a comparison and, where possible, produce a picture of emerging developments in a European context.
Precise national figures are not published by the EU Statistical Office (Eurostat) and comparisons can be difficult to make as often estimates from other countries are suppressed, disclosive or largely estimated. However UK’s share of total EU manufacturers’ product sales in 2015 is estimated to be approximately 10%, behind Germany, France and Italy. The 5 countries, including Spain, accounted for around 70% of total EU sold production in 2015. Figure 4 shows the highest ranked products in 2015.
UK’s share to the total EU value of sales for motor vehicles with a petrol engine capacity above 1500cc was 18.4%. The share of motor vehicles with diesel engines between 1500cc and 2500cc were 9.4% for UK and 11.7% for Spain.
Germany has the highest motor vehicle production in the EU according to the European Automobile Manufacturers Association. Figure 4 shows that for Germany this includes the sale of motor vehicles with a petrol engine capacity below 1500cc (29.7%) and parts of vehicle bodies (44.3%). UK manufacturers’ share of these products was 5.4% and 9.9% respectively.
France is the leading EU member state for manufacturers’ sales of medicaments, excluding antibiotics, hormones, steroids, alkaloids and vitamins, at 16.2%, followed by Germany, (11.0%), UK (9.0%) with Spain and Italy recording sales value of 7.6% each.
About a third of EU manufacturers’ sales for parts for all types of aircraft are accounted for by the UK (31.6%) although Germany has a larger share (37.0%).
Germany also has a larger share of product sales for beer (17.9%) and fresh bread (32.8%) while France has the larger share of metal parts (24.1%). UK’s product share of beer and fresh bread is 17.0% and 14.9% respectively.
Outside the top 10, UK manufacturers reported the highest product sales of soft drinks in 2015 than any other EU member state, with a share of 25.7% of the total EU sales value, compared with 15.2% for Germany, 12.7% for France, 3.2% for Italy and 0.9% for Spain.
Whisky was 1 of 3 major products in which the UK had a share of over 80% of all EU manufacturers’ product sales, at 87.8%. The other 2 products were the manufacture of reaction engines within the aerospace industry (88.8%) and golf clubs and equipment (94.9%).
Products that were manufactured in other EU member states but not in the UK include ethylene, aeroplanes and other aircraft (for civil use) of an unladen weight greater than 15,000 kg and champagne (excluding alcohol duty).Nôl i'r tabl cynnwys
UK manufacturers’ product sales for 2015 have been revised since they were initially published in June 2016 as provisional results. Estimates for 2014 have also been revised from £363.9 billion published in December 2015, to £362.5 billion. Revisions are due to further survey data received from respondents as explained in the PRODCOM technical report.
A new style interactive tree map has been introduced to help users explore UK manufacturers’ value of sales by divisions and industries.
The top 10 UK manufacturers’ product sales in 2015 are shown in a chart to enable users to compare product rankings between 2015 and 2010.
This statistical bulletin includes a section on PRODCOM in the EU. This section shows the proportion of EU manufacturers’ value of sales for top 10 products by large EU member states.
PRODCOM estimates are based on a sample of businesses that are surveyed annually. Information on standard errors, response rates, revisions and annual product code changes can be obtained from the quality indicators pack which is available on our website. Standard errors are available for most products and inform users of the precision of the estimates. The 2015 provisional estimates are based on a response rate of 81.5%.
Our technical report describes the methodology and processes that are used to produce PRODCOM estimates. This includes information on sampling procedures, data collection and converting respondent data into published estimates. It complements the PRODCOM user guide which explains the variables and provides guidance on using the data correctly, including how to use the open data tables.
The Quality and Methodology Information report contains important information on:
the strengths and limitations of the data
the quality of the output: including the accuracy of the data, how it compares with related data
uses and users
how the output was created
The survey is based on the PRODCOM list, which comprises about 3,805 manufacturing products and some services. As PRODCOM is carried out across EU member states the list, and detailed product descriptions, are provided by the European Statistical Office (Eurostat) each year.
You might also be interested in:
PRODCOM excel datasets
PRODCOM explorable datasets
PRODCOM survey microdata from the VML (subject to legal frameworks, disclosure control and access agreements); anyone wishing to become an approved researcher may contact the VML team via VML.Service.Desk@ons.gsi.gov.uk
special extracts and tabulations of PRODCOM data for the UK are available to order (subject to legal frameworks, disclosure control, resources and the ONS charging policy, where appropriate); enquiries should be made to PRODCOM Publications firstname.lastname@example.org or telephone: +44 (0)1633 456746, any user requested data will be published on our website
Manylion cyswllt ar gyfer y Bwletin ystadegol
Ffôn: +44 (0)1633 456746